Vibratory Finishing Machines For the Glossy Finish

Finishing machines are used for the finishing process that is carried out on parts for the purposes of cleaning, deburring, polishing and separation of parts. There are many types of finishing machines. The two important and widely used ones are the tumbling barrel machines and the vibratory finishing machines. In the tumbling variety, a huge barrel holds the parts and finishing media, compounds and water. In the vibratory finishing machines, there are usually tubs or bowls that undergo a shaking action at a particular speed. The shaking action is caused by a shaft that is attached to the tub or bowl.

The vibratory finishing machines come as large floor models (that can be fixed to the floor) or as smaller bench models (that are fixed on tables or benches). When the machine shakes at a high rate of speed, it causes the parts and the media to rub against each other thus resulting in cleaning and polishing. Using the vibrating machines, it is possible to get a very precise cutting of burrs and parts. They are also very effective in removing debris and dirt lodged in nooks and crannies, like a bore for instance. This sort of cleaning is not possible in a tumbling barrel. Vibratory finishing machines are ideally suited for use on delicate and intricate parts; also for large and bulky surfaces like wing spans - because they have high speeds combined with very short strokes. This provides powerful finishing but at the same time places very less stress on the parts. Vibratory finishing machines can be automated or semi automated quite easily and are good for continuous or batch processing.

Finishing or deburring media are materials that provide an abrasive action on parts to aid in the finishing process. They can be natural or man made. They come in different shapes and sizes depending on the requirements. When media is used in finishing machines, they accomplish finishing tasks like cleaning of oils, grease, dirt, grime etc and deburring of jagged edges or removing extra material from parts. Natural deburring media like walnut shells and corn cob media are made from naturally available material - they are non toxic, environment friendly, reusable and cost effective.

Man made deburring media like ceramic media and plastic deburring media are used for heavy and aggressive finishing. They come in different shapes and sizes. Some of the standard shapes found in the deburring media are cones, cylinders, pyramids, three headed stars, triangles etc. These shapes aid in polishing and cleaning hard to reach recesses in the parts. Depending on the shape and size of the holes in the parts, the shape of the media is chosen. If the part has a complex design with many corners having different shapes, then a combination of media shapes can be used to achieve uniform finish in the parts. Companies having a vast experience in the finishing industry generally have the expertise to find tailor made solutions to any deburring requirements.

Grav Co LLC continues to manufacture the finest mass finishing equipment and supplies in the marketplace. We still build vibratory finishing machines, disc finishing, high speed and low speed barrel finishing, and spin finishing equipment in our Sturgis, Michigan plants. We also manufacture vibratory finishing media, treated cob meal and various liquid and powder compounds, and have a very good line of deburring media.
Article Source